NSN 5305-01-646-2018
Close Tolerance Screw
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-646-2018.
-
MPN or Model
JSFB28E08-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel
More from these suppliers
- 5305-01-306-2793 MPN FT1300-12-4-5Panel Screw Assembly
- 5306-01-336-3511 MPN FTC7306-3-6Shear Bolt
- 5305-01-498-0670 MPN FT1046-52AHexagon Head Cap Screw
- 5306-01-648-3072 MPN NAS6804DU27Shear Bolt
- 1680-00-443-3514 MPN 12C856-807Bell Crank
- 1560-00-520-3847 MPN CM00042-11-4-3Torque Shaft Assembly
- 1560-00-557-8307 MPN 12W5910-820Aircraft Leading Edge
- 1560-00-847-8723 MPN 12W281-5Skin Wing Plug Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Pricing and Availability
Get a quote for 5305-01-646-2018 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
JSFB28E08-5 | Lockheed Martin Corporation |
JSFB28E08-5 | Fastener Technology Corp. |
Stock Check
